Experimental and computational studies of the corrosion inhibitive effects of Zingiber officinale rhizomes on mild steel corrosion in acidic solutions
Keywords:
Zingiber officinale, solvation molecules, corrosion, molecular dynamic simulation,, Inhibition EfficiencyAbstract
The study investigates the anticorrosion potentials of Zingiber officinale (ZO) on mild steel induced in 1.0 M HCl and 0.5 M H2SO4 acid solution respectively using structural characterization (gas chromatography-mass spectroscopy, GC-MS and Fourier transform infrared spectroscopy, FTIR) and electrochemical (electrochemical impedance spectroscopy, EIS and potentiodynamic polarization, PDP) techniques respectively and theoretical simulations. The structural characterization was performed to identify chemical constituents and functional groups present in the plant extract whereas electrochemical techniques and theoretical computations were used to examine the anticorrosion potentials of the extract and validate the experimental results. The GC-MS result revealed the presence of twenty-three (23) compounds within the extract and out of which three (1-(1,5-dimethyl-4-hexenyl)-4-methyl-, dodecanoic acid and 9-Octadecenoic acid (Z)-2-hydroxy-1-(hydroxymethyl)ethyl ester) were selected for computational simulation and the results of FTIR revealed the presence of the following functional groups (O-H, C=C, C=O, C-C and C-H) in the ZO extract. The results of EIS revealed that extract of ZO exhibited corrosion inhibition efficieny of 82.7% and 93.6 % for mild steel in 1 M HCl and 0.5 M H2SO4 solution respectively at maximum inhibitor concentration of 1000 mg/L for mild steel. Also, PDP results revealed that ZO extract functioned as mixed inhibitor because both the anodic and cathodic reaction process was altered. The quantum chemical calculation results revealed that 9- Octadecenoic acid (Z)-2-hydroxy-1-(hydroxymethyl) ethyl ester had a good energy gap (\Delta E) compared to other two compounds, indicating its better adsorption interaction with the metal surface in sulfuric acid environment. This was further confirmed by its good adsorption energy of -355.55 Kcal/mol with mild steel surface in H2SO4 environment compared with -167.81Kcal/mol in HCl environment from the molecular dynamic simulation.
Published
How to Cite
Issue
Section
Copyright (c) 2023 C. B. Adindu, S. C. Nwanonenyi, C. B. C. Ikpa

This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
Similar Articles
- Peter Urane Achimugwu, Mathew Ngugi Kinyanjui, David Mumo Malonza, Analysis of a fractional order climate model due to excessive emission and accumulation of carbon dioxide in the atmosphere , Journal of the Nigerian Society of Physical Sciences: Volume 5, Issue 4, November 2023
- Mahesh Kumar Singh, Pushpa Choudhary, Arun Kumar Singh, Pushpendra Singh, LWRNPIP: Design of a light weight restrictive non-fungible token based on practically unclonable functions via image signature patterns , Journal of the Nigerian Society of Physical Sciences: Volume 7, Issue 4, November 2025
- Catherine N. Ogbizi-Ugbe, Osowomuabe Njama-Abang, Samuel Oladimeji, Idongetsit E. Eteng, Edim A. Emanuel, Synergistic intelligence: a novel hybrid model for precision agriculture using k-means, naive Bayes, and knowledge graphs , Journal of the Nigerian Society of Physical Sciences: Volume 8, Issue 1, February 2026
- Shehu Magawata Shagari, Danlami Gabi, Nasiru Muhammad Dankolo, Noah Ndakotsu Gana, Countermeasure to Structured Query Language Injection Attack for Web Applications using Hybrid Logistic Regression Technique , Journal of the Nigerian Society of Physical Sciences: Volume 4, Issue 4, November 2022
- M. Basim, N. Senu, A. Ahmadian, Z. B. Ibrahim, S. Salahshour, Solving fractional variable-order differential equations of the non-singular derivative using Jacobi operational matrix , Journal of the Nigerian Society of Physical Sciences: Volume 5, Issue 2, May 2023
- J. O. Kuboye, O. F. Quadri, O. R. Elusakin, Solving third order ordinary differential equations directly using hybrid numerical models , Journal of the Nigerian Society of Physical Sciences: Volume 2, Issue 2, May 2020
- M. E Khan, E. E. Etim, V. J Anyam, A Abel, I. G Osigbemhe, C. T Agber, Computational studies on Emodin (C15H10O5) from Methanol extract of Pteridium acquilinum leaves , Journal of the Nigerian Society of Physical Sciences: Volume 3, Issue 4, November 2021
- Abiola T. Owolabi, Kayode Ayinde, Taiwo J. Adejumo, Wakeel A. Kasali, Emmanuel T. Adewuyi, Comparative Analysis of the Implication of Periods Before and During Vaccination of COVID-19 Infection in Some Regional Leading African Countries , Journal of the Nigerian Society of Physical Sciences: Volume 4, Issue 2, May 2022
- Dalal Khalid Almutairi, Mohamed A. Abdoon, Salih Yousuf Mohamed Salih, Shahinaz A.Elsamani, Fathelrhman EL Guma, Mohammed Berir, Modeling and Analysis of a Fractional Visceral Leishmaniosis with Caputo and Caputo–Fabrizio derivatives , Journal of the Nigerian Society of Physical Sciences: Volume 5, Issue 3, August 2023
- Gabriel James, Ifeoma Ohaeri, David Egete, John Odey, Samuel Oyong, Enefiok Etuk, Imeh Umoren, Ubong Etuk, Aloysius Akpanobong, Anietie Ekong, Saviour Inyang, Chikodili Orazulume, A fuzzy-optimized multi-level random forest (FOMRF) model for the classification of the impact of technostress , Journal of the Nigerian Society of Physical Sciences: Volume 7, Issue 3, August 2025
You may also start an advanced similarity search for this article.

