First Principles calculation of Half metallic proprieties of QCrAs (Q=Hf, Ti and Zr)
Keywords:
Half Heusler, Half metallic gap, Electronic band structure, Mechanical propertiesAbstract
The structural, electrical, magnetic, mechanical, and thermodynamic properties of some novel half-Heusler alloys QCrAs(Q=Hf, Ti and Zr) are investigated using first principles calculations. The results show that the three half Heusler alloys are half metals and they can find application in spintronics industries. They possess magnetic moment of 3\mu_B. The mechanical properties shows that they are mechanically stable. The B/G ratio of the three half-Heusler alloys show that they are ductile in nature and the Poisson’s ratio reveal that the plasticity of TiCrAs and ZrCrAs are higher than that of HfCrAs. The Debye temperature and average sound velocity of ZrCrAs is observed to be higher than the other two alloys. This implies that the thermal conductivity of ZrCrAs is the highest.
Published
How to Cite
Issue
Section
Copyright (c) 2023 M. I. Babalola, B. E. Iyorzor, S. O. Ebuwa

This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
Similar Articles
- T. W. David, B. J. Adekoya, C. M. Michael, S. A. Adekoya, O. A. Adenuga, S. O. Kareem, H. T. Oladunjoye, A. E. Ajetunmobi, O. T. Williams, D. T. Ogundele, A Study of the Relationship Between Southward Bz > -10 nT and Storm Time Disturbance Index During Solar Cycle 23 , Journal of the Nigerian Society of Physical Sciences: Volume 4, Issue 4, November 2022
- Sylvester J. Gemanam, Nursakinah Suardi, Barnabas A. Ikyo, Samson Damilola Oluwafemi, Terver Daniel, Samuel T. Kungur, Biostimulation Effects and Temperature Variation in Stimulated Dielectric Substance (Diabetic Blood Comparable to Non-Diabetic Blood) Based on the Specific Absorption Rate (SAR) in Laser Therapy , Journal of the Nigerian Society of Physical Sciences: Volume 3, Issue 2, May 2021
- Augustine Igwebuike Anya, Uko Ofe, Aftab Khan, Mathematical Modeling of Waves in a Porous Micropolar Fibrereinforced Structure and Liquid Interface , Journal of the Nigerian Society of Physical Sciences: Volume 4, Issue 3, August 2022
- Elsammani Ali Shokralla, Improving the thermal stability and dielectric properties of epoxy/phenolic resin type (novolac) composites by incorporating carbon nanofibers (CNFs) , Journal of the Nigerian Society of Physical Sciences: Volume 7, Issue 1, February 2025
- David O. Adekunle, Esther O. Faboro, Labunmi Lajide, Identification and quantification of bioactive compounds indifferent extracts of morinda lucida benth (rubiaceae) root using GC–MS analysis , Journal of the Nigerian Society of Physical Sciences: Volume 5, Issue 4, November 2023
- Olayinka Oluwaseun Oluwasina, Mochamad Zakki Fahmi, Olugbenga Oludayo Oluwasina, Enhancing cellulose fiber properties from chromolaena odorata and anana comosus through novel pulping chemical mixtures , Journal of the Nigerian Society of Physical Sciences: Volume 6, Issue 2, May 2024
- C. A. Oyelami, W. Akande, T. O. Kolawole, A Preliminary Geotechnical Assessment of Residual Tropical Soils around Osogbo Metropolis as Materials for Road Subgrade , Journal of the Nigerian Society of Physical Sciences: Volume 4, Issue 2, May 2022
- Abdulhameed Ado Osi, Sani Ibrahim Doguwa, Abubakar Yahaya, Yahaya Zakari, Abubakar Usman, Transmuted cosine Topp-Leone G family of distributions: properties and applications , Journal of the Nigerian Society of Physical Sciences: Volume 6, Issue 4, November 2024
- Samuel Olorunfemi Adams, Davies Abiodun Obaromi, Alumbugu Auta Irinews, Goodness of Fit Test of an Autocorrelated Time Series Cubic Smoothing Spline Model , Journal of the Nigerian Society of Physical Sciences: Volume 3, Issue 3, August 2021
- S. E. Fadugba, S. N. Ogunyebi, B. O. Falodun, An Examination of a Second Order Numerical Method for Solving Initial Value Problems , Journal of the Nigerian Society of Physical Sciences: Volume 2, Issue 3, August 2020
You may also start an advanced similarity search for this article.

