Deposition Time induced Structural and Optical Properties of Lead Tin Sulphide Thin Films

Authors

  • J. Damisa
  • J. O. Emegha
    Department of Physics, University of Benin, Benin City, Edo State, Nigeria
  • I. L. Ikhioya
    Department of Physics and Astronomy, University of Nigeria, Nsukka, Enugu State, Nigeria

Keywords:

Thin films, XRD, band gap, Pb-Sn-S, refractive index, absorption coefficient

Abstract

Lead tin sulphide (Pb-Sn-S) thin films (TFs) were deposited on fluorine-doped tin oxide (FTO) substrates via the electrochemical deposition process using lead (II) nitrate [Pb(NO3)2], tin (II) chloride dehydrate [SnCl2.2H2O] and thiacetamide [C2H5NS] precursors as sources of lead (Pb), tin (Sn) and sulphur (S). The solution of all the compounds was harmonized with a stirrer (magnetic) at 300k. In this study, we reported on the improvements in the properties (structural and optical) of Pb-Sn-S TFs by varying the deposition time. We observed from X-ray diffractometer (XRD) that the prepared material is polycrystalline in nature. UV-Vis measurements were done for the optical characterizations and the band gap values were seen to be increasing from 1.52 to 1.54 eV with deposition time. In addition to this, the absorption coefficient and refractive index were also estimated and discussed.

Dimensions

E. Guneri, F. Gode, C. Ulutas, F. Kirmizigul, G. Altindemir. & C. Gumus, “Properties of P-type SnS thin films prepared by chemical bath deposition”, Chalcogenide Lett. 7 (2010) 685.

S. Sebastian, I. Kulandaisamy, S. Valanarasu, I. S. Yahia, H. Kim. & D. Vikraman, “Microstructural and electrical properties evaluation of lead doped tin sulphide thin films”, J. Sol-Gel Sci. Technol. 98 (2020) 52.

S.N. Nwankwo, S. Campbell, R.K.T. Reddy, N.S. Beattie, V. Barrioz, &. G Zoppi, “Temperature controlled properties of submicron thin SnS films”, Semicond. Sci. Technol. (2018). DOI:10.1088/1361-6641/aabc6f.

P.A. Nwofe, K.T. Ramakrishna Reddy, J. K. Tan, I. Forbes, & R.W. Miles, “Thickness dependent optical properties of thermally evaporated SnS thin films”, Phys. Procedia 25 (2012) 150.

G.H. Tariq, K. Hutchings, G. Asghar, & D.W. Lane, “Study of annealing effects on the physical properties of evaporated SnS thin films for photovoltaic applications”, J. Ovonic Res.6 (2014) 247.

C.L.C. Triana, E. Banguero, P. Bartolo-Perez, & Gordillo, “Preparation and characterization of SnS:Bi thin films”, Braz. J. Phys .41 (2011) 15-20.

A.E. Oluwalana, & P.A. Ajibade, “Effect of temperature and capping agents on structural and optical properties of tin sulphide nanocrystals”, J. Nanotechnol. (2019) DOI: 10.1155/2019/8235816.

I.L. Ikhioya, & A.J. Ekpunobi, “Effect of deposition period and pH on electrodeposition technique of zinc selenide thin films”, J. Nig. Assoc. Math. Phys. 28( 2) (2014) 281.

I.L. Ikhioya, M.C. Ezeorba, D.O. Okoroh, C.R. Anene, & C.O. Obasi, “The Influence of precursor temperature on the properties of Erbium-Doped Zirconium Telluride thin film material via electrochemical deposition”, Int. J. Appl. Phys. (SSRG-IJAP), 7(1) (2020) 102.

I.L. Ikhioya, & A. J. Ekpunobi, “Electrical and Structural properties of ZnSe thin films by Electrodeposition technique”, J. Nig. Assoc. Math. Phys. 29 (2015) 325.

R. Wahab, Y.S. Kim, & H.S. Shin,” Synthesis, characterization and effect of ph variation on zinc oxide nanostructures”, Mater. Trans. 50(8) (2009) 2092

J.O. Emegha, B. Olofinjana, M.A. Eleruja, O. Efe, & S.O. Azi, “Preparation and physical properties of CuxZn1-xS thin films deposited by metal organic chemical vapour deposition technique”, JMSRR 2(4) (2019) 1. DOI: 10.9734/JMSRR/2019/46490

J.O. Emegha, J. Damisa, F.O. Efe, B. Olofinjana, M.A. Eleruja, & S.O. Azi, “Preparation and characterization of metal organic chemical vapour deposited copper zinc sulphide thin films using single solid source precursors”, Eur. J. Mater. Sci. Eng. 4 (2019) 11. DOI: 10.36868/ejmse.2019.04.01.011

J.O. Emegha, M.C. Okafor, & K.E. Ukhurebor, “Optical properties of copper-zinc sulphide network from mixed single solid source precursors of copper and zinc dithiocarbamates”, Walailak J Sci & Tech, 18(1) (2020) http://wjst.wu.ac.th/index.php/wjst/article/view/9535

J. Damisa, B. Olofinjana, O. Ebomwonyi, F. Bakare, & S.O. Azi, “Morphological and optical study of thin films of CuAlS2 deposited by metal organic chemical vapour deposition technique”, Mater. Res. Express 4 (2017) 1.

M.F. Bin Hashim, “Morphologies, Optical and Electrical Characterization of Aluminum Tin Sulphide Thin Films”, Master of Philosophy Dissertation, Universiti Teknologi Malaysia, 2017.

M. Arslan, A. Habib, M. Zakria, & A. Mehmood, “Elemental, structural and optical properties of nanocrystalline Zn 1-x Cu x Se films deposited by close spaced sublimation technique”, J. Sci: Adv. Mater. Devices 2 (2017) 79.

B. Olofinjana, A.C. Adebisi, F.O. Efe, O. Fasakin, K.O. Oyedotun, M.A. Eleruja, E.O.B. Ajayi, & N. Manyala, “Single solid source precursor route to the synthesis of MOCVD Cu-Cd-S thin films”, Mater. Res. Express 6 (2019). DOI: 10.10688/2053-1591/ab413a

R.L. Orimi, H.K. Fadafan, & A. Asadpour “Effect of Sn concentration on the optical and structural properties of Pb1-xSnxS nanopowder”, Eur. J. Appl. Phys.(2014). DOI:10.1015/epjap/2014140159

A.S. Hassanien, & A.A. Akl, “Influence of composition on optical and dispersion parameters of thermally evaporated non-crystalline Cd50S50-xSex thin films, J. Alloy Compd. 648 (2015) 280.

K.S. Ajay, “An empirical relation showing the variation of refractive index with energy gap for A1B111C2v1& A11B1vC2v type ternary semiconductors”’ Int. J. Innov. Res. Tech. 5 (2018) 85.

S. Ahmad, M. Ashraf, & Aijaz Ahmad, “Electronic and optical properties of semiconductor and alkali halides”, Arab J. Sci. Eng. 38 ( 2013) 1889.

M.M. Abbas, A.A. Shehab, A. Al-Samuraee, & N.A. Hassan, “Effect of deposition time on the optical characteristics of chemically deposited nanostructure PbS thin films”, Energy Procedia 6 (2011) 241.

Published

2021-11-29

How to Cite

Deposition Time induced Structural and Optical Properties of Lead Tin Sulphide Thin Films. (2021). Journal of the Nigerian Society of Physical Sciences, 3(4), 455-458. https://doi.org/10.46481/jnsps.2021.157

Issue

Volume 3, Issue 4, November 2021

Section

Original Research
Copyright & Licensing

Copyright (c) 2021 Journal of the Nigerian Society of Physical Sciences

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

Deposition Time induced Structural and Optical Properties of Lead Tin Sulphide Thin Films. (2021). Journal of the Nigerian Society of Physical Sciences, 3(4), 455-458. https://doi.org/10.46481/jnsps.2021.157

Similar Articles

101-110 of 124

You may also start an advanced similarity search for this article.