Concentrations of heavy metal content in indoor dust and potential exposure in preschool children
Keywords:
Heavy metal, Indoor dust, Preschool environment, Metal concentrationAbstract
Indoor dust serves as a medium for the deposition of heavy metals, and young children's rapid physical growth and hand-to-mouth behavior expose them to the impacts of heavy metals. This project aimed to measure the concentrations of heavy metals in classroom dust from the selected preschools in southwestern Nigeria. Dust samples were taken via a dust collector and analyzed quantitatively and qualitatively via the Atomic Absorption Spectroscopy (AAS) scheme. The descriptive and inferential statistical method was employed for the data analysis, and standard calibration, recovery analysis, and blank determination were carried out for the quality control measures. It was found that, in the dry season, the total metal concentrations in dust were 1.82 gg-1 Cu to 80.00 gg-1 Zn, whereas, in the wet season, the heavy metal concentrations were 0.83 gg-1 Co to 38.43 gg-1 Zn. Hence, the selected preschool dust was significantly enriched with high levels of Cd and As contamination but unpolluted for Co, Cu, Mn, and Pb across all examined metals. The results indicate elevated concentrations of lead (Pb) and cadmium (Cd) in high-traffic indoor spaces, with levels exceeding recommended safety thresholds. Lead (Pb) exposure is linked to neurodevelopmental disorders and reduced cognitive function, Cadmium (Cd) can cause kidney damage and impair bone development, while arsenic (As) is associated with immunotoxicity and an increased risk of cancer. To mitigate these risks, this study recommends practical measures, including frequent wet cleaning of floors and surfaces to reduce dust accumulation and limiting the use of materials known to contain heavy metals, such as lead-based paints and older plumbing fixtures.
Published
How to Cite
Issue
Section
Copyright (c) 2025 J. A. Akinpelu, K. P. Ojo, S. O. Salawu, G. O. Olutona, F. O. Aweda, O. O. Jegede (Author)

This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
Similar Articles
- B. T. Ogunyemi, F. K. Ojo, Corrosion Inhibition Potential of Thiosemicarbazide Derivatives on ALuminium: Insight from Molecular Modelling and QSARs Approaches , Journal of the Nigerian Society of Physical Sciences: Volume 5, Issue 1, February 2023
- Iniobong P. Etim, Rebecca Emmanuel Mfon, A comparison of the performance and energy resolution of CdTe and Si detectors in the X-ray Fluorescence studies of metal samples and Alloys , Journal of the Nigerian Society of Physical Sciences: Volume 4, Issue 4, November 2022
- T. O Lawal, O. Fawale, J. A. Sunday, G. B. Egbeyale, Interpretation of airborne radiometric data of flamingo field, Southwestern Nigeria , Journal of the Nigerian Society of Physical Sciences: Volume 7, Issue 1, February 2025
- B. O. Eyenubo, V. O. Peretomode, F. Egharevba, S. A. Osakwe, O. G. Avwioro, Polychlorinated biphenyls (PCBs) in sediments and fish from dredged tributaries and creeks of river Ethiope, South-South, Nigeria: sources, risk assessment and bioaccumulation , Journal of the Nigerian Society of Physical Sciences: Volume 6, Issue 2, May 2024
- M. I. Babalola, B. E. Iyorzor, S. O. Ebuwa, First Principles calculation of Half metallic proprieties of QCrAs (Q=Hf, Ti and Zr) , Journal of the Nigerian Society of Physical Sciences: Volume 5, Issue 1, February 2023
- O. Oderinde, C. L. Mgbechidinma, A. O. Agbeja, A. A. Ajayi, A. O. Ogundiran, O. O. Olaide, O. A. Orelaja, C. A. Mgbechidimma, C. O. Ajanaku, K. D. Oyeyemi, Appraising raw exhaust pollutant gases emissions from industrial generators using statistics and machine learning approaches , Journal of the Nigerian Society of Physical Sciences: Volume 7, Issue 4, November 2025
- S. Iyakwari, H. J. Glass, G. K. Rollinson, A. A. Umbugadu, O. D. Opaluwa, B. O. Frankie, Validation of Near InfraRed preconcentration strategies for ore sorting , Journal of the Nigerian Society of Physical Sciences: Volume 4, Issue 1, February 2022
- J. A. Adebisi, O. M. Babatunde, Green Information and Communication Technologies Implementation in Textile Industry Using Multicriteria Method , Journal of the Nigerian Society of Physical Sciences: Volume 4, Issue 2, May 2022
- Benjamin Iyorzor, Michael Babalola, Half-metallic Characteristics of the Novel Half Heusler Alloys XCrSb (X=Ti, Zr, Hf ) , Journal of the Nigerian Society of Physical Sciences: Volume 4, Issue 1, February 2022
- Sathish Kumar Kannaiyan, Rengaraj R, Venkata krishnan G R, Gayathri P K, Lavanya G, Hemapriya D, Antimicrobial activity of green synthesized tri-metallic oxide Ni/Cr/Cu nanoparticles , Journal of the Nigerian Society of Physical Sciences: Volume 3, Issue 3, August 2021
You may also start an advanced similarity search for this article.

